What is the voltage of the charger? Can you use a different charger?
The Tineco Floor One uses 100-240V in its charger. We do not recommend using a different charger as that may not be compatible with the battery.
How much time does the Floor One take to be fully charged?
The Floor One takes around 4 hours to charge to full.
How long can the floor washer run on a full charge?
The Floor One has a Lithium-ion 21.6V 2500mAh battery that allows it to run 17-22 minutes depending on how often the floor washer is running on max power.
What is the suction power of the floor washer when sucking up water and debris?
Suction power for the floor washer ranges from 15-22AW (Air Watts) depending on how dirty the floor is.
How often I need to clean the brushroll?
We advise to clean the brushroll after each use.
How do you start self-cleaning mode?
To start the Floor One's self-cleaning mode, please follow the following steps: Always keep the floor washer plugged in. Place the floor washer on the storage tray. Empty the Dirty Water Tank. The Clean Water Tank should be at least 1/3 full of water and the the battery is over 10%. Press self-cleaning button at the top of the handle to start the brush roll self-cleaning mode. The floor washer will automatically shut off once finished. The entire self-cleaning process takes about 100seconds.
How noisy is the floor washer?
The floor washer produces up to 78dBA of sound.
Can you use a third party cleaning solution?
It is not recommended to use a third party cleaning solution because the floor washer is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use.
Can this be used for dry vacuuming? Can you just vacuum without using water?
The Floor one can‘t be used without water for dry vacuuming. It will cause damage to the brush roller. Ideally you should use the Floor One with solution and water to automatically adjust solution and clean water flow to ensure an ideal cleaning result.
What kind of floors it can be used on?
The Floor One can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.
Do you have to vacuum an area first before using the Floor One?
There is no need to vacuum an area first because the Floor One can vacuum and wash the floor simultaneously.
When do you need to switch to Max mode?
The water and suction reach the maximum value in the strong mode, and the high-grade mode can be directly switched to cleaning when there are stubborn stains on the surface that are difficult to clean.
S5 Pro suction mode is always suction, will cause damage to the motor
No.
Can dust be removed in suction mode?
It is not recommended to use the suction mode for the ground with suction liquid .
When the machine is fully charged, how long does it take to run out of power if left unused? Is it possible to turn on normally after recharging after no power?